详细信息
- G3242#合适于把有机硅橡胶在硫化时粘合至不锈钢(金属)表面,G3242#是无色的,以水分敏感的化合物为基础,因此,使用G3242#时遵守下列规则是极其重要的。 1.容器仅能短暂地打开。 2.用剩的底漆不要返回容器。 3.要覆盖有机硅橡胶的不锈钢(金属)表面上底漆前要彻底弄干净,表面的清洁可用丙酮或低沸点的烃类溶剂。 可用喷涂.浸涂.刷涂方法(25-50g/m2),涂了G3242#的制品必须在空气中干燥至少15分钟,建议在室温下干燥胶层1-2小时,用烘箱以80-100℃烘干10-30分钟可以减少干燥时间,也可以长时间干燥如24小时,但应该保护不被污物和灰尘弄脏,在干燥或烘干过程结束后,就立即贴复硅橡胶,如需要大面积贴面或辊和橡胶金属部件需要注射模塑,应该在120-140℃烘20-40分钟,这是防止底漆模在固化时受大的剪切力损伤的唯一方法。 G3242#是硅胶与不锈钢(金属)粘接用增粘剂,可使硅胶与不锈钢(金属)牢固的粘接在一起, 不锈钢(金属)表面不需做特殊处理, 只要清洁干净就可以, 用于大面积粘接表现更出色。 G3242#用于高温硅胶与不锈钢(金属)粘接(在220℃下长期使用保持原有的特性)。 G3242#用于高温固体硅胶与金属粘接,先在不锈钢(金属)表面涂一层很薄的G3242#增粘剂,待干燥后,再用高温固体硅胶硫化。 经验表明: 使用芳基过氧化物和芳烷基过氧化物可获得好得多的粘附性,酰基过氧化物只有当基质不耐高温时才应使用。 Metal and solid silicone primer processing adhesivesG3242 G3242# suitable for the silicone rubber during vulcanizat2 Do not return the container with leftover primer. 3 (metal) on the surface of stainless steel to cover the organic silicone rubber prime ion bonded to a stainless steel (metal) surface, G3242 # is colorless, and moisture sensitive compounds is based, therefore, it is extremely important to observe the following rules when G3242#. 1. Container only open briefly. r to thoroughly clean, the cleaning of the surface can be used acetone or a low boiling point hydrocarbon solvent. Available spraying. Dipping. Brushing method (25-50g/m2), coated G3242# The article must be dried in air for at least 15 minutes, it is recommended that 1-2 hours of drying at room temperature adhesive layer, using an oven to 80-100 ° C drying 10-30 minutes can reduce the drying time, and can also be dried such as 24 hours for a long time, but it should be protected from being soiled by the dust and dirt, after drying or the end of the drying process, and immediately affixed multiplexed silicone rubber, such as need veneer of large area or a roll and a rubber metal member need to be injection molded, it should be in the 120-140 ℃ bake for 20-40 minutes, which is the only way to prevent primer modulus when cured by a large shearing force injury. G3242 # silicone and stainless steel (metal) adhesive with tackifier, silicone and stainless steel (metal) can be a strong bond with the surface of stainless steel (metal) do not need to do special processing, as long as clean can be used large area bonding better performance. G3242 # for high temperature silicone and stainless steel (metal) bonding (to maintain the original characteristics of long-term use at 220 ℃). G3242 # for high-temperature solid silicone and metal bonding, first coated with a thin layer of stainless steel (metal) surface G3242 # tackifier, allowed to dry, and then the high-temperature solid silicone vulcanized. : Experience has shown that better adhesion can be obtained using aryl peroxides, and aralkyl peroxides, acyl peroxides should be used only when the matrix is not high temperature only. 深圳景益化工有限公司 杭州景益化工科技有限公司 电话/传真:0755-28586330,13600171536,18968102205. szjingyi@163.com. 2459503437@qq.com, 385292935@qq.com 公司主页:http://szsjyhg.cn.alibaba.com。淘宝店铺网址:http://shop67014001.taobao.com 胡先生。
- 价格：850 元/千克
包装：1kg,20kg
产地：德国
供应地：深圳景益化工有限公司 杭州景益化工科技有限公司 - 产品规格：G3242
免责声明：以上所展示的信息由企业自行提供，内容的真实性、准确性和合法性由发布企业负责，化工网对此不承担任何保证责任。我们原则上建议您选择化工网高级会员或VIP会员。